The sensor is designed to measure the torque of rotary table. As a result, the operating state of drilling rig and bit can be also reflected. Based on the principle of Hall Effect, while the torque is changed, the supply electric current is also changed, which is used to drive rotary table.
Power source: +15V ~ 30V DC (recommended +24V DC)
Measuring range: 0 ~ 1000A
Output current: 4 ~ 20mA DC
Measurement accuracy: ± 1% FS
Frequency response: 0 ~ 1000Hz
Environmental conditions: operating temperature -40℃ ~ +85℃
SMC-ETQ-B11 AC/DC torque sensor adopts a closed loop structure. According to the hall effect principle, the measured current value is proportional to the output current of hall sensor, that is, when the measured current changes at 0-1000a, the output current of the sensor changes within the range of 4 ~ 20mA, and is in direct proportion.
THE OPERATING 4.1 SENSOR INSTALLATION
Open the sensor clamp, wrap the measured wire with foam plastic and adjust the thickness of winding, so that the measured wire can be fixed in the round hole after the clamp is closed, without shaking. Pay special attention to the direction of current during installation. The side with regulating port is the direction of current input, and the side without regulating port is the direction of current output. Do not install in the wrong direction.
4.2 Sensor wiring V+ (yellow) : +24V DC
VO (blue) : 4-20ma output
OV (brown) : ground
All sensors either are EX type or are intrinsically safe. Zone barriers are installed in the Unit. Using well-known brand products at home and abroad, the sensors of mud logging unit have the advantage of technical and performance indicators. At the same time, the service life is long.
DELIVERY SHIPPING AND SERVICES
CNPS can ship the goods to you by Express, Air, or sea.
1.Why do you choose our company?
We are trading company, founded a perfect oil and gas equipment product supply chain. We have worked in the oil industry for about 10 years(follow ISO9001 standard).We will checked our mill every months to make sure their quality. The after-service are charged by ourselves.So we can reply any problem within 24 hours.
2. How can you guanranty your quality?
Every time we will inspect our factories first. This inspect will include the persons, the present products, their scale etc. If everything is ok, we will start to cooperate. During cooperation, we will go to the factories to test the products to guanranty the products has good quality. If it doesn’t meet our requirement, the goods will be refused.
3. Do you have price advantage?
For us, the quality is our first consideration. And the second consideration is the price. We couldn’t say we have the lower price, because of quality issue. We need to say we have the best price.
4. How long do you do the export business?
For our sales persons, they have 8-10years experience to do the international business. They understand each step for the export and do good service for each of our clients.